oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 835-if70.0m-105a 70.0 mhz if saw filter 10.45 mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 835-if70.0m-105a january 2011 rev a 70.0 mhz if saw filter 10.45 mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit source & load impedance: 50 ? no matching required pin description b, c, d, f ground a in e out
oscilent part number 835-if70.0m-105a january 2011 rev a 70.0 mhz if saw filter 10.45 mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -30 - 80 storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz 69.92 70.0 70.08 insertion loss at fo db - 23.5 25.0 amplitude ripple variation db p-p - 0.65 1.0 group delay variation nsec - 80 120 absolute delay at fo sec - 3.44 - temperature coefficient ppm/c - -72 - bandwidth at ?1.0 db mhz 10.30 10.45 - bandwidth at ?3.0 db mhz 10.45 10.67 - bandwidth at ?50.0 db mhz - 11.65 11.85 ultimate rejection db 55 60 -
oscilent part number 835-if70.0m-105a january 2011 rev a 70.0 mhz if saw filter 10.45 mhz bandwidth product specification p. 3 www.oscilent.com frequency response
|